Master degree in Materials Science

Selected research products

M P Luda, N Li Pira, D Trevisan, V Pau (2018)
Evaluation Of Anti-Fingerprint Properties Of Plastic Surfaces Used In Automotive Components.
https://iris.unito.it/handle/2318/1692445

Cipriani, E , Zanetti, M , Bracco, P , Brunella, V , Luda, M P , Costa, L (2016)
Crosslinking and carbonization processes in PAN films and nanofibers.
https://iris.unito.it/handle/2318/1557712

Luda Maria Paola, Dall', Anese Riccardo (2014)
On the microstructure of Polypropylene by Pyrolysis GC-MS.
https://iris.unito.it/handle/2318/150394

MP Luda, V. Brunella, and D. Guaratto (2013)
Characterisation of Used PP-Based Car Bumpers and their Recycling Properties
ISRN Materials Science
Volume 2013, Article ID 531093, 12 pages
Hindawi Publishing Corporation
http://dx.doi.org/10.1155/2013/531

M P Luda, D Marabello, L Costa (2013)
Studies on the failure of synthetic alpinistic ropes.
https://iris.unito.it/handle/2318/146864

M P Luda (2012)
Pyrolysis of WEEE plastics.
https://iris.unito.it/handle/2318/91093

M P Luda (2012)
Meccanismi chimici di reticolazione.
https://iris.unito.it/handle/2318/101918

M P Luda (2012)
Py-GC/MS of texile fibres.
https://iris.unito.it/handle/2318/133420

Luda M P , Brunella V (2011)
Pyrolysis-GC/MS of PET fibers.
https://iris.unito.it/handle/2318/133101

Luda M P (2011)
Recycling of Printed Circuit Boards.
https://iris.unito.it/handle/2318/85765

M P Luda, V Pirro (2011)
Fibres from Eichornia Crassipes: Use in thermoplastic composites.
https://iris.unito.it/handle/2318/89113

Luda M P (2011)
INVESTIGATION ON THE STRUCTURE OF POLY(ETHYLENE TEREPHTHALATE) FIBRES.
https://iris.unito.it/handle/2318/84179

M P Luda (2011)
Riciclo dei rifiuti plastici in Niger. Il ruolo dell Università.
https://iris.unito.it/handle/2318/130926

Francesco Trotta, Enrico Drioli, Maria Paola Luda, Simone Musso, Katia Martina, Simona Ceresa Mio (2010)
Amino Derivatives of PEEK-WC.
https://iris.unito.it/handle/2318/75297

Luda M P , Balabanovich A I , Zanetti M (2010)
Pyrolysis of fire retardant anhydride-cured epoxy resins.
https://iris.unito.it/handle/2318/71039

Luda M P , Costa L (2009)
Use of DMA in the characterization of composites made of LLDPE and Watyer Hyacinth.
https://iris.unito.it/handle/2318/65046

Luda M P , Laouali M Sani (2009)
Composites made of LLDPE and EICHornia crassipes wood: preparation and properties.
https://iris.unito.it/handle/2318/131809

Luda M P , Laouali M Sani (2009)
Preparation and Characterization of composites made of recycled polyethylene and water Hyacinth.
https://iris.unito.it/handle/2318/131810

Luda M P (2009)
Atelier Ambiente Piemonte e Sahel: Il riuso della plastica: confronto su esperienze e casi.
https://iris.unito.it/handle/2318/66068

Luda M P , Zanetti M , Brunella V , Bracco P , Scalarone D (2008)
Py-GC/MS analysis of paints for domestic use.
https://iris.unito.it/handle/2318/130860

Luda M P, Balabanovich A I , Guaratto D , Zanetti M (2008)
Pyrolysis of Fire retardant anhydride cured epoxy resins.
https://iris.unito.it/handle/2318/132924

M P Luda, A I Balabanovich, D Guaratto (2007)
Thermal degradation of anhydride cured epoxy resins.
https://iris.unito.it/handle/2318/49171

S Ceresa Mio, M P Luda, A Parmaliana, C Espro, F Mendolia, E Drioli, F Trotta (2007)
Sviluppo di membrane polimeriche catalitiche per l’ossidazione parziale delle paraffine leggere ad intermedi liquidi ossigenati.
https://iris.unito.it/handle/2318/48040

V Brunella, P Bracco, I Carpentieri, M Zanetti, M P Luda, L Costa (2007)
Macroradicals involved in irradiation of polyethylene.
https://iris.unito.it/handle/2318/49935

M P Luda (2007)
IFTS - Tecnico superiore per la trasformazione delle materie plastiche.
https://iris.unito.it/handle/2318/51634

I Carpentieri, P Bracco, V Brunella, M Zanetti, M P Luda, L Costa (2007)
Post-irradiation oxidation of UHMWPE at room temperature.
https://iris.unito.it/handle/2318/50266

Luda M P (2007)
Convenzione Università di Torino- Dip. di Chimica IFM e la Soc. Terraverde. Progetto Poliplast: ottenimento di nuovi materiali per riciclo di miscele di plastiche (Poliplast)”. Report 2 giugno 2007.
https://iris.unito.it/handle/2318/48561

M P Luda, A I Balabanovich (2007)
Thermal hydrodehalogenation of 2,4-dibromophenol by polymeric.
https://iris.unito.it/handle/2318/48867

Luda M P (2007)
Convenzione Università di Torino, Dip. di Chimica IFM con la Società Terraverde: Progetto Poliplast; ottenimento di nuovi materiali per riciclo di miscele di plastiche. Report 1: marzo 2007.
https://iris.unito.it/handle/2318/50767

P BRACCO, V BRUNELLA, M ZANETTI, M P LUDA, L COSTA (2007)
Stabilisation of UHMWPE with vitamin E.
https://iris.unito.it/handle/2318/37528

V BRUNELLA, P BRACCO, M ZANETTI, I CARPENTIERI, M LUDA DI CORTEMIGLIA, L COSTA (2006)
Lifetime of macroradicals in UHMWPE irradiated with electron beam.
https://iris.unito.it/handle/2318/18057

M Zanetti, P Bracco, V Brunella, M P Luda, L Costa (2006)
Triazinic rings formation in PAN thermal degradation.
https://iris.unito.it/handle/2318/52465

P BRACCO, V BRUNELLA, M ZANETTI, M LUDA DI CORTEMIGLIA, L COSTA (2006)
Stabilisation Of Uhmwpe With Vitamin E.
https://iris.unito.it/handle/2318/18058

V Brunella, M C Paganini, P Bracco, I Carpentieri, M Zanetti, M P Luda, L Costa (2006)
Lifetime of macroradicals in UHMWPE irradiated with electron beam.
https://iris.unito.it/handle/2318/50991

M P Luda (2006)
Le Materie Plastiche: errori e soluzioni nella Progettazione del prodotto.
https://iris.unito.it/handle/2318/53074

BRACCO P, BRUNELLA V, LUDA MP, BRACH DEL PREVER EM, ZANETTI M, COSTA L (2006)
Oxidation behaviour in prosthetic UHMWPE components sterilized with high-energy radiation in the presence of oxygen.
https://iris.unito.it/handle/2318/40119

BRACCO P, BRACH DEL PREVER EM, CANNAS M, LUDA MP, COSTA L (2006)
Oxidation behaviour in prosthetic UHMWPE components sterilised with high energy radiation in a low oxygen environment.
https://iris.unito.it/handle/2318/39717

L COSTA, E M BRACH DEL PREVER, P BRACCO, M P LUDA (2005)
Stabilisation of UHMWPE with Vitamin E.
https://iris.unito.it/handle/2318/47666

L COSTA, P BRACCO, E M BRACH DEL PREVER, M P LUDA (2005)
Oxidation and stabilisation of orthopedic UHMWPE.
https://iris.unito.it/handle/2318/48011

Luda M P (2005)
La progettazione di apparecchi elettrici ed elettronici eco-compatibili dopo il D. Legs 25.7.2005 n°151.
https://iris.unito.it/handle/2318/53081

M P Luda, V Brunella, M Zanetti, P Bracco (2005)
Automotive TPO Recycling and Characterization.
https://iris.unito.it/handle/2318/51633

M ZANETTI, P BRACCO, V BRUNELLA, M LUDA DI CORTEMIGLIA, L COSTA (2005)
Degradazione Termica di Poliacrilonitrile.
https://iris.unito.it/handle/2318/18054

Costa L, Bracco P, Brach EM, Brunella V, Zanetti M, Luda MP (2005)
Oxidation and packaging of orthopaedic UHMWPE.
https://iris.unito.it/handle/2318/61484

A I BALABANOVICH, A HORNUNG, M LUDA DI CORTEMIGLIA, W KOCH, V TUMIATTI (2005)
Pyrolysis study of 2,4-dibromophenol reflecting reactions with PP in a post-treatment decontamination process.
https://iris.unito.it/handle/2318/6490

F Trotta, C Baggiani, M P Luda, E Drioli, T Massari (2005)
A Molecular imprinted membrane for molecular discrimination of tetracycline hydrochlorid.
https://iris.unito.it/handle/2318/30106

F Trotta, C Baggiani, M P Luda, E Drioli, T Massari (2005)
A Molecular imprinted membrane for molecular discrimination of tetracycline hydrochloride.
https://iris.unito.it/handle/2318/1152

S V LEVCHIK, M LUDA DI CORTEMIGLIA, P BRACCO, P NADA, L COSTA (2005)
Discoloration in Fire Retardant Polyurethane flexible foams.
https://iris.unito.it/handle/2318/6491

P BRACCO, V BRUNELLA, M P LUDA, M ZANETTI, L COSTA (2005)
Radiation-induced crosslinking of UHMWPE in the presence of co-agents :chemical and mechanichal characterisation.
https://iris.unito.it/handle/2318/40637

BRACCO P, BRACH DEL PREVER E M, BRUNELLA V, LUDA M P, COSTA L, GALLINARO P, KURTZ S M (2005)
Sterilization and oxidation of UHMWPE prosthetic components.
https://iris.unito.it/handle/2318/21389

LUDA M P , BRACCO P, COSTA L, LEVCHIK S (2004)
Discolouration in fire retardant flexible polyurethane foams. Part I. Characterisation.
https://iris.unito.it/handle/2318/22996

S V LEVCHIK, M LUDA DI CORTEMIGLIA, P BRACCO, P NADA, L COSTA (2004)
Discoloration in Fire Retardant Polyurethane flexible foams.
https://iris.unito.it/handle/2318/18052

R Carpignano, G Cerrato, D Lanfranco, M P Luda, E Mostacci, T Pera (2004)
Laboratorio di Chimica.
https://iris.unito.it/handle/2318/62543

R K Kielczynski, F Trotta, J Wolska, M Bryjak, M P Luda, C Baggiani, E Drioli (2004)
Influence of copolymer molecular weight on the discrimination properties of molecular imprinted membranes.
https://iris.unito.it/handle/2318/73312

M Zanetti, M P Luda, L Costa (2004)
Structural Effects in the PVC Thermal Degradation.
https://iris.unito.it/handle/2318/51488

M P LUDA, P BRACCO, L COSTA, S LEVCHIK (2004)
Relevant factors in scorch generation in fire retardant flexibile polyurethane foams. 2: Reactivity of isocyanate, urea and uretane groups.
https://iris.unito.it/handle/2318/4333

M P Luda, A I Balabanovich, F Trotta, M Zanetti, L Costa (2004)
Pyrolysis of bromine containing bisphenol a structures.
https://iris.unito.it/handle/2318/51632

M P Luda, L Costa, P Bracco, S V Levchik (2004)
Relevant factors in scorch generation in fire retarded flexible polyurethane foams.
https://iris.unito.it/handle/2318/53073

M P LUDA, P NADA, P BRACCO, L COSTA, S LEVCHIK (2004)
Relevant factors in scorch generation in fire retardant flexibile polyurethane foams. 1: Ammino group reactivity.
https://iris.unito.it/handle/2318/4332

COSTA L, BRACCO P, BRACH DEL PREVER EM, LUDA MP (2003)
Oxidation and stabilization of orthopaedic UHMWPE.
https://iris.unito.it/handle/2318/35170

M P Luda, P Bracco, L Costa, S V Levchik (2003)
Discoloration in Fire Retardant Flexible Polyurethane Foams.
https://iris.unito.it/handle/2318/52704

M LUDA DI CORTEMIGLIA, G RAGOSTA, P MUSTO, D ACIERNO, L DI MAIO, G CAMINO, V NEPOTE (2003)
“Regenerative Recycling of Automotive Polymer Components: Polypropylene based Car Bumpers”.
https://iris.unito.it/handle/2318/6466

M LUDA DI CORTEMIGLIA, A I BALABANOVICH, A HORNUNG, G CAMINO (2003)
Thermal Degradation of a Brominated Bisphenol A Derivative.
https://iris.unito.it/handle/2318/6483

M LUDA DI CORTEMIGLIA, G RAGOSTA, P MUSTO, A POLLICINO, G CAMINO, A RECCA, V NEPOTE (2002)
Natural Ageing of Automotive Polymer Components: Characterisation of New and Used Car Bumpers”.
https://iris.unito.it/handle/2318/75848

M Rossi, G Camino, M P Luda (2001)
“Characterisation of smoke in expanded polystyrene combustion”Polymer Degradation and Stability, , 74 (3): 507-512 2001 Modest 2000 Edition.
https://iris.unito.it/handle/2318/102428

N Tzankova Dintcheva, F P La Mantia, D Acierno, L Di Maio, G Camino, F Trotta, M P Luda, M Paci (2001)
"Characterisation and reprocessing of Greenhouse Films" 72 (1) (2001) 141-146 Polymer Degradation and Stability.
https://iris.unito.it/handle/2318/102495

M P Luda, G Camino, E Laurenti, S Novelli, T Temtchenko, S Turri (2001)
"Mechanism of Photostabilization of Perfluoropolyether Coatings by Hindered Amine Stabilisers " Polymer Degradation and Stability.
https://iris.unito.it/handle/2318/102494

L COSTA, P BRACCO, E BRACH DEL PREVER, M LUDA DI CORTEMIGLIA, L TROSSARELLI (2001)
Analysis of products diffused into UHMWPE prosthetic components in vivo.
https://iris.unito.it/handle/2318/36598

N Tzankova Dintcheva, F P La Mantia, F Trotta, M P Luda, G Camino, M Paci, L Di Maio, D Acierno (2001)
“Effect of Filler Type and Processing Apparatus on the Properties of the Recycled “Light Fraction” from Municipal Post-Consumer Plastics”.
https://iris.unito.it/handle/2318/104513

BRACH DEL PREVER EM, COSTA L, LUDA MP, BRACCO P, CROVA M, GALLINARO P (2000)
La diffusione del liquido sinoviale nel polietilene protesico durante il servizio in vivo.
https://iris.unito.it/handle/2318/34208

Castelli R, Cori C, Giusti D, Luda M P, Papuzza C (2000)
Glass fibre length determination in traditional and recycled GRP materials[Determinazione della lunghezza delle fibre di vetro in materiali GRP tradizionali e riciclati].
https://iris.unito.it/handle/2318/116938

E M Brach del Prever, L Costa, M P Luda, P Bracco, M Crova, P Gallinaro (2000)
“La diffusione del liquido sinuviale nel polietilene protesico durante il servizio in vivo”.
https://iris.unito.it/handle/2318/112751

L COSTA, LUDA M P , TROSSARELLI L (2000)
Mechanism of condensed phase action in flame retardants synergistic systems based on halogen-metal compounds.
https://iris.unito.it/handle/2318/4597

L COSTA, LUDA M P , CAMERON G G , QURESHI M Y (2000)
The thermal and thermo-oxidative degradation of poly(tetrahydrofuran) and complexes with LiBr and LiI.
https://iris.unito.it/handle/2318/4598

M P Luda, R Tauriello, G Camino (2000)
"Mechanisms of Photo-oxidation of Polyurethane Derivatives".
https://iris.unito.it/handle/2318/102496

G Ragosta, P Musto, E Martuscelli, P Russo, L Zeloni, G Camino, M P Luda (2000)
"Recycling of plastic Car Components: multilayer Items based on Polypropylene"Polymer Recycling, 2000.
https://iris.unito.it/handle/2318/102449

G Camino, A Ya Polishchuk, M P Luda, M Revellino (2000)
"Comparison of the Role of two Shrinkage-Controlled Low-Profile Additives in Water Aging of Polyester Resin-Glass Fiber Composites.".
https://iris.unito.it/handle/2318/104561

Castelli R, Cori C, De Lazzaro M, Luda M P , Romeo A, Rota P M (1999)
Characterisation of partially recycled SMC composite materials for TLC application[Caratterizzazione di materiali compositi SMC parzialmente riciclati, utilizzati nelle telecomunicazioni].
https://iris.unito.it/handle/2318/114788

Camino G , Castelli R , Cori C , Luda M P , Polishchuck A Ya , Romeo A a (1999)
Accelerated durability tests of SMC composite materials for industrial application[Prove accelerate di resistenza alla degradazione di materiali compositi SMC per applicazioni industriali].
https://iris.unito.it/handle/2318/114789

P Roma, M P Luda, G Camino (1999)
"Synergistic Action of Fluorine-containing Additives in Bromine/Antimony Fire Retardant ABS".
https://iris.unito.it/handle/2318/109766

A B Boscoletto, M Checchin, L Milan, P Pannocchia, M Tavan, G Camino, M P Luda (1998)
"Combustion and Fire Retardance of Poly(2,6-Dimethyl-1,4-Phenylene Ether) - High Impact Polystyrene Blends. II:Chemical Aspects".
https://iris.unito.it/handle/2318/101962

Costa L, Luda MP, Trossarelli L, Brach del Prever EM, Crova M, Gallinaro P (1998)
In vivo UHMWPE biodegradation of retrieved prosthesis.
https://iris.unito.it/handle/2318/39130

L Costa, G Camino, M P Luda, G G Cameron, M Y Qureshi (1998)
"Thermal and Thermo-oxidative Degradation of Poly(Ttrimethylene Oxide) and its Complexes with NaSCN and LiClO4".
https://iris.unito.it/handle/2318/104983

S V Levchik, G Camino, M P Luda, L Costa, A Lindsay, D Stevenson (1998)
"Thermal Decomposition of Cyclotriphosphazenes.I. Alkyl-Aminoaryl Ethers"J, 67 461-472 (1998).
https://iris.unito.it/handle/2318/104303

G Camino, A Ya Polishchuk, M P Luda, M Revellino, R Blancon, J J Martinez-Vega (1998)
"Water ageing of SMC Composites. A Tool for Material Characterisation"Polymer Degradation and Stability, 61 53-63 (1998).
https://iris.unito.it/handle/2318/104302

S V Levchik, G Camino, M P Luda, L Costa, G Muller, B Costes (1998)
"Epoxy Resins cured with Aminophenylmethylphosphine Oxide. II. Mechanism of thermal Decomposition".
https://iris.unito.it/handle/2318/104304

L COSTA, LUDA M P , TROSSARELLI L L , BRACH DEL PREVER E M , CROVA M , GALLINARO P (1998)
In vivo biotic oxidation of retrieved UHMWPE.
https://iris.unito.it/handle/2318/4584

COSTA L, LUDA MP, TROSSARELLI L, BRACH DEL PREVER EM, CROVA M, GALLINARO P (1998)
Oxidation in orthopaedic UHMWPE sterilized by gamma-radiation and ethylene oxide.
https://iris.unito.it/handle/2318/39003

G Merle, J Allemand, G Camino, M P Luda, M Revellino (1998)
"SMC Microvoids Morphology Analysis. Ageing Effects.
https://iris.unito.it/handle/2318/101961

G Camino, M P Luda (1997)
"Mechanistic Study of Intumesce".
https://iris.unito.it/handle/2318/112641

G Camino, M P Luda, A Ya Polishchuk, M Revellino (1997)
"Environmental Ageing of Polyester Resin Glass Fibres Composites"Annales des Composites,
https://iris.unito.it/handle/2318/115733

L COSTA, M P LUDA, L TROSSARELLI (1997)
Ultra-High molecular Weight polyethylene: II. Thermal- and photo-oxidation.
https://iris.unito.it/handle/2318/4595

L COSTA, M P LUDA, L TROSSARELLI (1997)
Ultra-High molecular Weight polyethylene: I. Mechano-oxidative degradation.
https://iris.unito.it/handle/2318/4594

L COSTA, M P LUDA, E M BRACH DEL PREVER (1997)
Degradation of Ultra High Molecular Weight Polyethylene in vivo.
https://iris.unito.it/handle/2318/4593

G Camino, M P Luda, A Ya Polishchuk, M Revellino, R Blancon, G Merle, J J Martinez-Vega (1997)
"Kinetic Aspects of Water Sorption in Polyester Resin-Glass Fibres Composites".
https://iris.unito.it/handle/2318/105597

V Bernardi, G De Santis G Camino, M P Luda, G Merle, J J Martinez-Vega, R Blancon (1997)
"Integrated analytical Approach for testing and selecting SMC Materials".
https://iris.unito.it/handle/2318/109121

P Roma, G Camino, M P Luda (1997)
"Mechanistic Studies on Fire Retardant Action of Fluorinated Additives in ABS".
https://iris.unito.it/handle/2318/109767

R Blancon, J J Martinez-Vega, G Merle, M Revellino, G Camino, A Ya Polishchuk, M P Luda (1997)
"Durability of Sheet Moulding Compounds: Influence of hydrothermal Ageing on Morphology and Molecular Mobility at microscopic Scale ".
https://iris.unito.it/handle/2318/105030

L Costa, G Camino, M P Luda, G G Cameron, M Y Qureshi (1996)
"The thermal Oxidation of Poly(Propylene Oxide) and its Complexes with LiBr and LiI".
https://iris.unito.it/handle/2318/105598

S Levchik, G Camino, L Costa, M P Luda (1996)
"Mechanistic Study of thermal Behaviour and Combustion Performance of Carbon Fibre-Epoxy Resin Composites Fire Retarded with a Phosphorus-Based Curing System"Polymer Degradation and Stability,
https://iris.unito.it/handle/2318/105599

M P Luda, L Costa, E M Brach del Prever, F Buzzi (1996)
"Caratterizzazione mediante Spettroscopia Infrarossa dell'ultra High Molecular Weigh Polyethylene utilizzato nelle Artroprotesi".
https://iris.unito.it/handle/2318/116474

G Camino, M P Luda, A Ya Polishchuk, M Revellino (1996)
"Chemical Structure and Water Diffusion In Polyester Resin Glass Fibres Composites".
https://iris.unito.it/handle/2318/109768

G Camino, M P Luda, L Costa, M Guaita (1996)
G. Camino, M.P. Luda, L. Costa, M. Guaita"Thermal Degradation of Ethyleneurea-Formaldehyde Polycondensates".
https://iris.unito.it/handle/2318/105601

S Levchik, G Camino, M P Luda, L Costa, G Muller, B Costes, Y Henry (1996)
"Epoxy Resins cured with Aminophenylphosphine Oxide. I. Combustion Performance",
https://iris.unito.it/handle/2318/105600

L Costa, G Camino, M P Luda, G G Cameron, M Y Qureshi (1995)
"The thermal Degradation of Poly(Propylene Oxide) and its Complexes with LiBr and LiI".
https://iris.unito.it/handle/2318/112560

S V Levchik, G Camino, M P Luda, L Costa, B Costes, Y Henry, E Morel, G Muller (1995)
"Mechanistic Study of Thermal Behaviour and Combustion Performance of Epoxy Resins: I TGDDM/DDS System".
https://iris.unito.it/handle/2318/115729

G Camino, M P Luda, L Costa (1995)
"Recent Developments in Intumescent Fire Retardant Systems: Ammonium Polyphosphate-Poly(Ethyleneurea Formaldehyde) Mixtures".
https://iris.unito.it/handle/2318/111038

S V Levchik, G Camino, M P Luda, L Costa (1995)
"Thermal Decomposition of 4,4’-Diamminodiphenylsulfone".
https://iris.unito.it/handle/2318/113647

B Boscoletto, M Checchin, M Tavan, G Camino, L Costa, M P Luda (1994)
"Combustion and Fire Retardance of Poly(2,6 Dimethyl-1,4-Phenylene Ether)-High Impact Polystyrene Blends: I. Morphological Aspects".
https://iris.unito.it/handle/2318/117027

G Camino, L Costa, M P Luda (1994)
"Combustion and Fire Retardance in Polymeric Materials".
https://iris.unito.it/handle/2318/113379

S L Levchik, G Camino, M P Luda, L Costa, B Costes, Y Henry, E Morel, G Muller (1994)
"Mechanistic Study of Thermal Behaviour and Combustion Performance of Epoxy Resins: I. Homopolymerised TGDDM"P.
https://iris.unito.it/handle/2318/115728

G Camino, L Costa, M P Luda (1993)
"Environmental Aspect of Fire Retardant Polymers".
https://iris.unito.it/handle/2318/111921

P Roma, M P Luda, G Camino (1993)
"The Use of Fluorinated Additives in Fire Retardance of Polymers".
https://iris.unito.it/handle/2318/117026

G Bertelli, R Benassi, R Marchini, G Camino, L Costa, M P Luda (1993)
"The Use of thermographic Tecnique in Evaluation of Polymer Combustion and Fire Retardant Performance"Die Makromolekulare Chemie - Macromolecular Symposia, 74 111-116 (1993).
https://iris.unito.it/handle/2318/117023

G Camino, L Costa, M P Luda (1993)
"Mechanistic Aspects of Intumescent Fire Retardant Systems".
https://iris.unito.it/handle/2318/113220

B Boscoletto, M Checchin, L Milan, G Camino, L Costa, M P Luda (1993)
"Surface and Bulk Characterisation of Fire Retardant Poly(Phenylene Ether) - High Impact Polystyrene in the UL-94 Test".
https://iris.unito.it/handle/2318/110861

M Checchin, A B Boscoletto, G Camino, M P Luda, L Costa (1993)
"Mechanism of Fire Retardance in Poly(2,6 Dimethyl-1,4-Phenylene Ethers) - High Impact Polystyrene".
https://iris.unito.it/handle/2318/110907

A Casu, G Camino, M P Luda, M De Giorgi (1993)
"Mechanism of Fire Retardance in Glass Fibre Polymer Composites".
https://iris.unito.it/handle/2318/117024

G Bertelli, R Benassi, R Marchini, G Camino, L Costa, M P Luda (1993)
"Evaluation of Polymer Combustion and Fire Retardance by using Thermography".
https://iris.unito.it/handle/2318/113318

G Camino, M P Luda, L Costa (1993)
"Combustion and Fire Retardance in Polymeric Materials".
https://iris.unito.it/handle/2318/114310

U Bigliani, M Revellino, P Savio, U Grubisic, A Müller, G Camino, M Fucale, M P Luda (1992)
"Combined Fatigue and environmental Test of SMC Materials used for Truck Components".
https://iris.unito.it/handle/2318/114534

L Costa, G Camino, M P Luda (1992)
"Mechanistic Aspects of Halogenated Fire Retardant Systems"The Science and Technology of Fire Resistant Materials, Ed, Sagamore Army Materials Research Conference, p 255-260 (1992).
https://iris.unito.it/handle/2318/114536

O Chiantore, M P Luda, M Guaita (1992)
Thermal Degradation of Polybutadiene. 2. Overall Thermal Behaviour of Polymers with Different Microstructures.
https://iris.unito.it/handle/2318/116000

L Costa, G Camino, G Bertelli, R Locatelli, M P Luda (1991)
"Thermal Degradation and Fire Retardancy of Antimony and Bismuth Trihalides - Melamine Complexes".
https://iris.unito.it/handle/2318/113146

G Camino, L Costa, M P Luda (1991)
"Overview of Fire Retardant Mechamism".
https://iris.unito.it/handle/2318/115117

G Bertelli, G Camino, P Goberti, E Marchetti, M P Luda, L Costa (1991)
"Structure-Char Forming Relationship in Intumescent Fire Retardant Systems"Fire Safety Science G Cox and B. Langfor Eds. Elsevier Applied Science, p. 537-546 (1991).
https://iris.unito.it/handle/2318/112632

M Guaita, O Chiantore, M P Luda (1991)
Monte Carlo simulations of polymer degradations. 2. Degradations involving random chain scissions and volatilization of low molecular weight products.
https://iris.unito.it/handle/2318/110885

L Costa, G Camino, M P Luda (1990)
"Mechanism of thermal Degradation of Fire Retardant Melamine Salts"ACS Symposium Series, 425 211-238 (1990).
https://iris.unito.it/handle/2318/111650

M Guaita, O Chiantore, M P Luda (1990)
Monte Carlo simulations of polymer degradations. 1. Degradations without volatilization.
https://iris.unito.it/handle/2318/111833

O Chiantore, M P Luda, M Guaita (1989)
Changes of degree of polymerisation in the thermal degradation of poly(methyl methacrylate).
https://iris.unito.it/handle/2318/110888

O Chiantore, M P Luda, M Guaita, G Rendina (1989)
Thermal degradation of polybutadiene. 1. Reactions at temperatures lower than 250 °C.
https://iris.unito.it/handle/2318/110887

M P Luda, M Guaita, O Chiantore (1989)
Thermal degradation of poly(p-methyl styrene).
https://iris.unito.it/handle/2318/111201

 

Courses

• CHIMICA DELLE MACROMOLECOLE E DEI PROCESSI COMBUSTIVI (MFN0198)
  Corso di laurea magistrale in Chimica Clinica Forense e dello Sport
• CHIMICA INDUSTRIALE (MFN1180)
  Corso di laurea in Chimica e Tecnologie Chimiche
• Polymeric Materials with laboratory (MFN1282)
  Master degree in Materials Science
• Stage 12 (MFN1639)
  Corso di laurea in Scienza dei Materiali
  Corso di laurea in Scienza e Tecnologia dei Materiali
• Stage 6 (MFN1638)
  Corso di laurea in Scienza dei Materiali
  Corso di laurea in Scienza e Tecnologia dei Materiali
• Sustainable Polymers and Composite (CHI0161)
  Master degree in Materials Science

Research topics

Comportamento termico di polimeri in massa: meccanismi di degradazione termica, relazioni struttura-stabilità termica; meccanismi di combustione e di ritardo alla fiamma di materiali polimerici.

 Processi di invecchiamento di compositi polimerici e di materiali polimerici per effetto di agenti ambientali; stabilizzazione di sistemi polimerici.

  Riciclo di sistemi polimerici

Research groups

• MP - Materiali Polimerici

Academic bodies

• Department Board

• Commissione Biblioteca

• Commissione Autovalutazione e riesame dei Consigli dei Corsi di Studio in Chimica

• Commissione Didattica

• Consiglio del Corso di Studio

Third mission

• Il riciclo della plastica: incubo o realtà?
  Venerdì 27 novembre 2020
• PLS Scienza dei materiali 2015-16
  Mercoledì 8 febbraio 2017

Office hours

su appuntamento via email